Golden Technologies GP160 Manuel D’Utilisation

LiteRider PTC_Owner’s Manual                                                                                                                    Rev A_121911 

 
You may be spending a great deal of time on your LiteRider PTC. To provide you with the 
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to 

incorporate the following adjustments for operator comfort. 
 
COMFORT SETTINGS                                                                                                             
1. Seat Height

    

                 5. Footrest Height  

2. Arm Width        

 

             6. Joystick Bracket Length 

3. Armrest

 

Angle                 7. Joystick Position                                                                          

4.

 

Footrest Angle 

 

Make certain that the power to your LiteRider PTC is turned off before 

making any adjustments, to eliminate the risk of the joystick being accidentally bumped 
and activating the power chair. 

 
Seat Height Adjustment                                                                                                         
The seat is a center post design that is easily adjusted for height. See figure 8.                               
To adjust the height to a comfortable level:                                                                                     

1. Remove the seat. 
2. Place a 17mm wrench on the lock nut, and insert an 8mm Allen wrench into the bolt.   
3. Loosen and remove the bolt, washer and lock nut, noting their placement.  
4. Set the seat post to one of the two adjustment positions.  

                                                                      

                                

 

                                                                                                                                    
 

5. Reinsert the bolt, washer and lock nut in the same order you remove them and tighten 
securely. 

6. The seat stop must be positioned on the left side of the seat post. Remove the two 
screws, two lock nuts, and reposition the seat stop to the left side of the seat post. 
7. Reinsert the two screws, two lock nuts, and tighten securely.

 

           

17