Garmin 920XT Manuel Du Propriétaire

Never put batteries in mouth. If swallowed, contact your 

physician or local poison control center.
Replaceable coin cell batteries may contain perchlorate 

material. Special handling may apply. See 

Contact your local waste disposal department to properly 

recycle the batteries.

Use a small Phillips screwdriver to remove the four screws 

on the back of the module.

Remove the cover and battery.

Wait 30 seconds.

Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.

Replace the back cover and the four screws.
NOTE: Do not overtighten.

After you replace the heart rate monitor battery, you may need 

to pair it with the device again.

Garmin Express provides easy access to these services for 

Garmin devices. Some services may not be available for your 

device.
• Product registration
• Product manuals
• Software updates
• Map, chart, or course updates
• Vehicles, voices, and other extras

• Go to 

• Go to 

.

• Go to 

, or contact your Garmin dealer 

for information about optional accessories and replacement 

parts.

The device may need a clear view of the sky to acquire satellite 

signals. The time and date are set automatically based on the 

GPS position.

Go outdoors to an open area.
The front of the device should be oriented toward the sky.

Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.

• Connect your device to a wireless network.

Satellite information is wirelessly downloaded to your device, 

allowing it to quickly locate satellite signals.

• Pair your device with a Bluetooth enabled smartphone.

Satellite information is sent to your device, allowing it to 

quickly locate satellite signals.

• Take your device outside to an open area away from tall 

buildings and trees.

• Remain stationary for several minutes.

If the device stops responding, you may need to reset it. This 

does not erase any of your data or settings.

Hold   for 15 seconds.
The device turns off.

Hold   for one second to turn on the device.

You can restore all of the device settings to the factory default 

values.
NOTE: This deletes all user-entered information, but it does not 

delete your history.

Hold  .

Select Yes to turn off the device.

While holding  , hold   to turn on the device.

Select Yes.

NOTE: This deletes all user-entered information and activity 

history.
You can reset all settings back to the factory default values.

Select   > Settings > System > Restore Defaults > Yes.

You can view the unit ID, software version, GPS version, and 

software information.

Select   > Settings > System > About.

Before you can update your device software, you must have a 

Garmin Connect account, and you must download the Garmin 

Express application.

Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to 

your device.

Follow the on-screen instructions.

Do not disconnect your device from the computer during the 

update process.
NOTE: If you have already used Garmin Express to set up 

your device with Wi

‑Fi connectivity, Garmin Connect can 

automatically download available software updates to your 

device when it connects using Wi

‑Fi.

• Shorten the backlight timeout (

).

• Shorten the timeout to watch mode (

).

• Turn off activity tracking (

).

• Select the Smart recording interval (

).

• Turn off GLONASS (

).

Troubleshooting

15