Sony Ericsson P910a Manuel D’Utilisation

Once paired with a Bluetooth-enabled laptop, your P910a is 
ready to make a connection to the Internet or corporate network. 
Since Bluetooth is wire-free and requires no line-of-sight 
alignment, you can place the laptop in a comfortable position 
and let your P910a remain in your pocket, briefcase, or even be 
placed up to 10 metres away.

If you wish to use an infrared link, the range is typically up to 
one metre. The two infrared ports must be kept in line of sight, 
at an angle of no more than approximately 30 degrees.

The wizard simplifies creating GPRS DUN connections by 
setting the proper values in the PC DUN entry and linking the 
entry to one of the GPRS configurations in your P910a. You can 
also view and modify the GPRS settings in the P910a.

For HSCSD DUN entries, the wizard updates the modem 
settings such that the specified data rate and type of bearer 
(ISDN / Analogue) will be used when you make a DUN 
connection.

You can view or change the DUN entries created with the 
wizard using the standard Windows DUN user interface. 

The Dial-Up Networking Wizard software included in the 

must be installed in your PC and your P910a 

must be connected to the PC via cable, infrared or Bluetooth 

wireless technology. See ‘Connecting to other devices’ on 
page 133.

Make sure that you have any information concerning, for 
example, phone numbers, names of servers or domains, that the 
server that you want to connect to may require.

1. Start the 

 from the Sony Ericsson 

folder of the Start menu on your PC.

2. Choose Create a new Dial-Up connection.
3. Follow the instructions in the wizard.

1. Start the 

 from the Sony Ericsson 

folder of the Start menu on your PC.

2. Modify a Dial-Up connection.
3. Select the desired connection from the list.
4. Follow the instructions in the wizard.

To set up a CSD (GSM Data) or HSCSD connection you will 
need to install your P910a as a modem manually.