Sony Ericsson P908 Mode D'Emploi

Use 

to set the cable connection mode and the connection 

parameters used when communicating through your P908's 
cable port. 

•

Set the cable connection mode. Please note that you must set 
the mode to 

 when using the P908 as a modem and 

when using the DUN (Dial-up Networking) Wizard. 

•

Set the baud rate, parity, number of stop bits, character length 
and type of flow control required for the connection. When 
connecting your P908 via the desk stand to a USB port on 
your PC, use the following (default) settings:

Tip You can set the cable connection mode when the Flip is 
closed by selecting 

This option lets you choose what net to use when you are 
outside your operator’s area. Choose if you want to search for a 
new network or use a preferred one. You can also make a list of 
preferred networks.

•

 – Select between automatic or manual search for 

a network.

•

 – Tap the button to get a list of available 

networks.

•

 – Tap the button to search for available networks.

•

 – Show the networks that your P908 will search 

for when you are outside your home network.

Note Your operator may not allow you to access all available 
networks.

1. Tap 

.

2. Select a network from the displayed list.

3. Select a position in the Preferred list and tap 

.

115200

None

1

8

CTS/RTS