Emerson EM6113 Manuel D’Utilisation

Caller ID

IMPORTANT:

In order to use this unit’s Caller ID features, you must subscribe to

either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service
from your local telephone company.
This unit receives and displays information transmitted by your local phone company.

This information can include the phone number, date, and time; or the name, phone,

number, date, and time.

Your handset saves the numbers of the last 20 incoming calls in the call list. If the list is
empty, “EMPTY” is shown on the display.
New calls are signalled with the flashing icon.

Review / Dial back telephone numbers

The handset is in the idle state
Press the to open the call list. The name or the telephone number of the last call is
displayed.

To view number, date, and time of the call , press the button.

Press the button repeatedly, to view other entries.
Press the button, and the displayed telephone number is being dialled.

Enter the access code slowly after the beep (in delivery state “000”). You will hear two

short tones for confirmation.
You can now using the digit:
“2” - listen to the messages
During playback:

“2” - pause / proceed

“1” - repeat current message

“3” - skip to the next message

“11” - go to the previous message

“6” - stop playback

“7” - delete current message
“0” - delete all old mesages
“#” - record a message (Memo)
“4” - check the current OGM
“9” - select OGM /record new OGM
OGM selected:
“5” - start recording

“6” - stop recording
“8” - switch off answering machine (if it is set to on)
“9” - switch on answering machine (if it is set to off)
“6” - end remote operation

CID

MEMORY

CID

TALK

MENU

pressing the button and enter the PIN (000 in delivery state).

Tone/Pulse

You can switch the dial mode. In most situations the TONE option should be selected.

Press the button. Select BASE using and press the button.
Using select DIAL MODE and press the button.
Using select TONE or PULSE and press the button.

Press and HOLD the button for approximately 3 seconds. T (Tone) or P (Pulse)

appears in the display.

Press the button. Select HANDSET using and press the button.
Using select SELECT BASE and press the button.
Using select AUTO or MANUAL and press the button. If “MANUAL” is
selected, all bases the handset is subscribed to are shown. Select a base and press the
button.

Resetting the handset to (delivery state)

The handset will be reset to the delivery state - the entries in the phonebook, the caller list
and the redial list will be deleted.

Press the button. Select HANDSET using and press the button.
Using select RESET and press the button. Confirm the safety request by

MENU

Handset name

In the idle state the handset name and the internal telephone number is shown in the

display.

Press the button. Select HANDSET using and press the button.
Using select HANDSET NAME and press the button. Delete the old name
using . Enter the new name using the digit keys and press the button.

Key tone

The key tone is an acoustical confirmation for a pressed button.

Press the button. Select HANDSET using and press the button.
Using select KEYPAD BEEP and press the button.
Using select ON or OFF and press the button.

Selecting a base station

If the handset is subscribed to several bases you can select the active base. The setting

“AUTO” means, that the handset will automatically search for the base station with the

strongest signal (only in idle mode).

MENU

/
/

MUTE