HTC VODAUM-1.5.0-0.95 Manuel D’Utilisation
Cupcake User Guide R1.5.0
104
April 14, 2009
Safety Precautions for Radio Frequency Exposure
Use only original manufacturer-approved accessories, or accessories that do not contain any metal.
Use of non-original manufacturer-approved accessories may violate your local Radio Frequency
exposure guidelines and should be avoided.
Use of non-original manufacturer-approved accessories may violate your local Radio Frequency
exposure guidelines and should be avoided.
Exposure to Radio Frequency (RF) Signals
Your phone contains a radio transmitter and receiver. The radiated output power is far below the
international radio frequency exposure limits. These limits are part of comprehensive guidelines and
establish permitted levels of Radio Frequency energy for the general population. The guidelines are
based on the safety standards previously set by international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986
International Commission on Non-Ionising Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of
the equipment and for the safety of personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the equipment.
Your phone has an internal antenna. Use only the supplied integral antenna. Use of unauthorised or
modified antennas may impair call quality and damage your phone, causing loss of performance and
SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory
requirements in your country.
To assure optimal phone performance and ensure human exposure to Radio Frequency energy is
within the guidelines set forth in the relevant standards; always use your phone only in its normal-use
position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Contact with the antenna area may impair call quality and cause your phone to operate at a higher
power level than needed. Avoiding contact with the antenna area when your phone is IN USE
optimises the antenna performance and the battery life.
Body-worn measurements were tested for typical body-worn operations with the back of your phone
kept 1.5 cm from the body.
international radio frequency exposure limits. These limits are part of comprehensive guidelines and
establish permitted levels of Radio Frequency energy for the general population. The guidelines are
based on the safety standards previously set by international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-1992
National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986
International Commission on Non-Ionising Radiation Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of
the equipment and for the safety of personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the equipment.
Your phone has an internal antenna. Use only the supplied integral antenna. Use of unauthorised or
modified antennas may impair call quality and damage your phone, causing loss of performance and
SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory
requirements in your country.
To assure optimal phone performance and ensure human exposure to Radio Frequency energy is
within the guidelines set forth in the relevant standards; always use your phone only in its normal-use
position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Contact with the antenna area may impair call quality and cause your phone to operate at a higher
power level than needed. Avoiding contact with the antenna area when your phone is IN USE
optimises the antenna performance and the battery life.
Body-worn measurements were tested for typical body-worn operations with the back of your phone
kept 1.5 cm from the body.
SAR Information
0.954
W/kg @ 10g (Head)
1.870
W/kg @ 10g (Body)
Telecommunications & Internet Association (TIA) Safety Information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six inches
be maintained between a handheld wireless phone and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
be maintained between a handheld wireless phone and a pacemaker to avoid potential interference
with the pacemaker. These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
Should ALWAYS keep your phone more than six inches from their pacemaker when your phone is
turned on.
turned on.