HTC RHOD300 Manuel D’Utilisation

8  Getting Started

You need to remove the back cover before you can install the SIM card, battery 

and storage card. Also, make sure to always turn off the power before installing or 

replacing the SIM card and battery.

Make sure your device is turned off.
Remove the stylus.

Note  You need to temporarily remove the stylus to be 

able to remove or replace the back cover.

Firmly hold the device with both hands and the 

front panel facing down.

Push the back cover up with your thumbs until it 

disengages from the device and then slide it up to 

remove.

The SIM card contains your phone number, service details, and phonebook/

message memory. Your device supports both 1.8V and V SIM cards.

Note 

Some legacy SIM cards may not function with your device. You should consult with 

your service provider for a replacement SIM card. There may be fees for this service.

Remove the battery if it is installed.
Locate the SIM card slot, then insert 

the SIM card with its gold contacts 

facing down and its cut-off corner 

facing out the card slot.
Slide the SIM card completely into 

the slot.

Cut-off 

corner