HTC SEDN100 Manuel D’Utilisation

66  Using Phone Features

Bluetooth car kits that support the SIM Access Profile (SAP) can connect to 

your device and access its SIM card via Bluetooth. Once a SAP connection 

has been established, you can download SIM contacts from your device to 

the car kit phone. You can also use the car kit phone to answer and make 

calls using your device’s SIM card.

Notes   To enable downloading contacts onto the car kit, ensure that all contacts on the 

device are stored in the SIM card and not in the device memory. Configure the 

car kit to download contacts only from the SIM card.  

On your device, make sure that Bluetooth is turned on and set to 

visible mode. For information about turning on Bluetooth and 

enabling visible mode, see “Bluetooth modes” in Chapter 10.

Tap Start > Settings > Connections tab > Bluetooth > SIM Access 

tab.

On the BT Remote SIM Access screen, select the Remote SIM Access 

check box then tap Done.

Connect the car kit phone to your device via Bluetooth. To learn how 

to connect, consult your car kit phone’s manual.

If this is the first time you are pairing the car kit phone with your 

device, enter the car kit’s passcode on your device.

A pop-up message should appear on your device saying that a 

connection has been established between your device and car kit 

phone. Tap OK.

On the BT Remote SIM Access screen, tap Done.

Note 

You will not be able to make/receive calls, send/receive messages or perform 

related activities on your device when the SIM Access Profile connection is 

active. You’ll be able to do all these from the car kit phone during this time. 

After the connection is disconnected, you will be able to use your device as 

before.