HTC RAPH100 Manuel D’Utilisation

04  Experiencing Multimedia

Choose either Center Area to measure light using the center area of the 

subject, or Average to measure light using the area around the subject.

Prefix. When Default is selected as the prefix, the file name of each new 

captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for 

example: IMAGE_001.jpg. You may also choose to name files using either the 

current Date or Date & Time as the prefix.

Note  If you set the Camera to save captured photos to a storage card, the prefix 

cannot be selected. Captured photos will be named using the convention 

IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera 

Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on 

the storage card.

Counter. To reset the file naming counter back to 1, tap Reset.

Flicker Adjustment. When taking indoor shots, flicker on the camera screen 

may be caused by inconsistencies between the vertical scan rate of the 

camera display and the flicker frequency of fluorescent lighting. To reduce 

flicker, you can change the flicker adjustment setting to Auto or to the proper 

frequency (50Hz or 60Hz) of the power in the country where your device is 

being used.

  Grid (Photo mode). Choose whether or 

not to show a grid on the Camera screen. 

Showing a grid helps you frame and center 

your subject easily and accurately.

Record with Audio (Video and MMS Video 

mode). Select On to record audio with 

the captured video clips, or select Off to 

capture video without audio.

Grid marks

  Template (Picture Theme mode). Select a template.

Recording Limit (Video mode). Set the maximum duration or file size for 

recording video.