HTC RHOD400 Manuel D’Utilisation

2.

Install the battery by following these steps:

䡲

Align the battery’s exposed copper contacts with the battery connectors inside the battery 
compartment.

䡲

Insert the contact end of the battery first and then gently push the battery into place.

3.

Replace the back cover, and insert the stylus back into the stylus compartment. 

1.

Press the 

Power

 button.

2.

When you turn on your device for the first time, your device starts up and guides you to calibrate the 
touch screen. Follow the onscreen instructions to complete the screen calibration process.

3.

Your device will then be activated.

䡲

If your device is already activated, it will search for Sprint service and then enter standby mode.

䡲

If your device is not yet activated, see “Activating Your Device” on page 3 for more information.

䢇

, it is probably activated and ready to use.

䢇

, it is designed to 

activate automatically. To confirm your activation, make a phone call.

䢇

, you 

will need to go online to activate your new device. 

䡲

From your computer’s Web browser, go to 

 and complete the onscreen 

instructions to activate your new device.

When you have finished, make a phone call to confirm your activation. If your device is still not activated or 
you do not have access to the Internet, contact Sprint Customer Service at 

 for assistance.

Your device’s battery should have enough charge for your device to turn on and find a signal, set up your 
voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” 
on page 13 for details.

• Do not press the End key while your device is being activated. Pressing the End key cancels the activation 

• If you are having difficulty with activation, contact Sprint Customer Service by dialing 1-888-211-4727 from