HTC RHOD400 Manuel D’Utilisation

Use the Correct External Power Source

A product should be operated only from the type of power source indicated on the electrical ratings label. If 
you are not sure of the type of power source required, consult your authorized service provider or local 
power company. For a product that operates from battery power or other sources, refer to the operating 
instructions that are included with the product.

The AC Adapter/Charger designed for this unit requires the use of a standard 120 V AC power source for 
device operation.

Never attempt to disassemble or repair an AC adapter/charger. Never use an AC adapter/charger if it has a 
damaged or worn power cord or plug. Always contact an authorized service center, if repair or replacement 
is required.

Never alter the AC cord or plug on an AC adapter/charger. If the plug will not fit into the available outlet, have 
a proper outlet installed by a qualified electrician.

Never allow any liquids or water to spill on an AC adapter/charger when it is connected to an AC power 
source.

Always use the authorized AC adapter/charger to avoid any risk of bodily injury or damage to your cellular 
phone or battery.

Never attempt to connect or disconnect the AC adapter/charger with wet hands. Always unplug the AC 
adapter/charger from the power source before attempting any cleaning. Always use a soft cloth dampened 
with water to clean the equipment, after it has been unplugged.

Handling the cord on this product or cords associated with accessories sold with this product, will expose 
you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. 
Wash hands after handling.

Always disconnect the travel charger or desktop charger from the power source when it is not in use.