HTC 8125 Manuel D’Utilisation

Getting Started 

|

 11

Bi-color LED on the left side: Blue for Bluetooth system 

notification of powered-up and ready to transmit radio 

frequency signal, and Green for Wi-Fi status.

- Blinking Blue indicates the device is in Bluetooth-

enabled mode.

- Blinking Green indicates the device is in Wi-Fi-enabled 

mode.

Please note that Bluetooth and Wi-Fi features can 

coexist on your device. If the two features are enabled 

simultaneously, the LED will blink Blue and Green 

alternately.

Listen to audio or a phone call from here.

Bi-color LED on the right side: Green and Red for GSM 

standby, SMS message, GSM network status, notification, 

battery charging status.

-  Blinking Green indicates the device connects to the 

GSM network.

-  Glowing Green indicates the battery is fully charged 

(using the AC adapter).

-  Blinking Red indicates the battery is low.

-  Glowing Red indicates the device is in LDO charging 

mode (the battery is empty).

-  Blinking Amber (Green + Red) indicates there is 

notification from the system.

-  Glowing Amber (Green + Red) indicates the battery is 

under charging by connecting the AC adapter.

Press to launch Internet Explorer.

Launches the outlook (email) application.

Use to write, draw, or make a selection with the stylus.

Performs the command shown in the label shown on the 

Display Screen above the button.

Performs the command shown in the label shown on the 

Display Screen above the button.

Press to end a call.

Press this multi-directional control up, down, left, or right 

to move through menus, program instructions; carry out 

the selection by pressing the center button.

Press to answer an incoming call or dial a number.

Press up or down to adjust the volume. To adjust the 

conversation phone volume, you must do it during a call. 

Adjusting the volume at another time will affect the ring, 

notification, and MP3 sound levels.

Press to start Comm manager; press and hold to switch to 

vibration mode.