HTC 99HLR002-00 Manuel D’Utilisation

Camera 107

Zooming

Before taking a photo or video, you can first use the onscreen zoom bar to zoom in or

out of your subject.

When you’ve just opened the camera or switched between photo and video modes,

the zoom bar shows on screen for a few seconds. To display it again so you can zoom,

do the following:



Tap anywhere on the Viewfinder screen. Then slide your finger across the

zoom bar to zoom in or out.



In photo mode, tapping on the Viewfinder screen moves the focus to your

tapped area. To avoid moving the focus, press the VOLUME UP or VOLUME

DOWN button to zoom.

When you’re recording video, the zoom bar is always shown onscreen. You can freely

zoom in or out while recording.

Taking a photo

1. From the Home screen, tap

> Camera.

2. Before taking the photo, you can zoom in or out first on your subject. To find out

3. Tap the Flash button repeatedly to choose a flash mode depending on your

lighting conditions.

Auto flash

Flash on

Flash off

4. Choose the resolution and other camera settings you want to use. See

5. You can choose an effect to apply to your photo. See "Adding effects" for

details.

6. Point the camera and focus on your subject. See "Auto focusing" for details.

Then tap

or press the CAMERA button to take the photo.

You can also set the camera to automatically take a photo without the need for

you to tap the shutter release button. See "Auto capturing" for details.

7. Choose what you want to do with the photo you’ve just taken. See "After

You can also take a photo using the second camera. Just tap

onscreen to switch

to the second camera. When you’re using the second camera to take photos, some of

the features like flash, auto focus, and zooming are not available.



If you choose 720p HD resolution for video recording, there’s no zooming available.



If you’re using the second camera, there’s no zooming available.