Nokia N93 Manuel D’Utilisation

connect your device to the internet and compatible 
devices that have wireless LAN. For information about 
using your device in a home network, see ‘Home network’, 
p. 19.

To use wireless LAN, a wireless LAN must be avilable in the 
location, and your device must be connected to the 
wireless LAN.

Some places, like France, have restrictions on the use of 
wireless LAN. Check with your local authorities for more 
information.

Features using wireless LAN, or allowing such features to 
run in the background while using other features, increase 
the demand on battery power and reduce the battery life.

Your device supports the following wireless LAN features:

• IEEE 802.11b/g standard
• Operation at a frequency of 2.4 GHz
• Wired equivalent privacy (WEP) with keys up to 128 

bits, Wi-Fi protected access (WPA), and 802.1x 
encryption methods. These functions can be used only 
if they are supported by the network.

To use wireless LAN, you must create an internet access 
point (IAP) in a wireless LAN. Use the access point for 
applications that need to connect to the internet. See 

‘Wireless LAN access points’ in the Additional applications 
guide.

Important: Always enable one of the available 

encryption methods to increase the security of your 
wireless LAN connection. Using encryption reduces the risk 
of unauthorized access to your data. 

A wireless LAN connection is established when you create 
a data connection using a wireless LAN Internet access 
point. The active wireless LAN connection ends when you 
end the data connection. To end the connection, see 
‘Connection manager’, p. 91.

You can use wireless LAN during a voice call or when 
packet data is active. You can only be connected to one 
wireless LAN access point device at a time, but several 
applications can use the same wireless LAN connection.

When you activate 

, you can still use wireless LAN 

(if available). Remember to comply with any applicable 
safety requirements when establishing and using a 
wireless LAN connection.

 Tip! To check the unique media access control (MAC) 

address that identifies your device, enter *#62209526# 
in the standby mode.

For information about WLAN wizard, see ‘WLAN wizard’ in 
the Additional applications guide.