Nokia PM 3205 Manuel D’Utilisation
Section 2K: Additional Features
119
Listening to the FM Radio
Your phone contains an FM radio. You can select up to 20 of your
favorite stations and set them for convenient listening any time you like.
favorite stations and set them for convenient listening any time you like.
Turning on the Radio
To turn on the radio:
1.
Connect a headset or a Music Stand to the Pop-Port connector.
2.
From the standby mode, press Menu, scroll to Radio, and press
Select. (The radio turns on automatically.)
Select. (The radio turns on automatically.)
3.
To adjust the volume, return to the standby mode and press
to decrease the volume or
to increase the volume.
Using Voice Commands to Operate Your Radio
You can create voice commands that operate your radio when you
speak them.
speak them.
To create voice commands:
1.
From the standby mode, press Menu, scroll to Settings, and
press Select.
press Select.
2.
Scroll to Voice commands and press Select.
3.
Scroll to Radio and press Select.
4.
Scroll to Radio on, Radio off, Next channel, or Previous channel,
depending on the command that you want to create, then
press Options.
depending on the command that you want to create, then
press Options.
5.
Scroll to Add command and press Select.
6.
Press Start and speak your command after the tone.
.
Note:
The quality and signal strength of a radio broadcast depends on the
coverage of the radio station in your particular area.
coverage of the radio station in your particular area.
The radio must have a headset or a Music Stand connected to the
Pop-Port connector on your phone. (The wires of the headset function
as the antenna, so let them hang freely.)
Pop-Port connector on your phone. (The wires of the headset function
as the antenna, so let them hang freely.)
Tip:
You could say “Next station” or other words when creating a voice
command for Next channel. The phone does not understand the words,
it only remembers the sounds. The same is also true for other commands.
command for Next channel. The phone does not understand the words,
it only remembers the sounds. The same is also true for other commands.