Nokia 2125i Manuel D’Utilisation

Page de 169
S e t t i n g s
42
8. Settings
Use this menu to change the time settings, call settings, phone settings, display 
settings, tone settings, enhancement settings, security settings, network, 
network services, and to restore the factory settings.
■ Call settings
Location information sharing (2125i only)
Location information sharing is a network service and must be supported by your 
wireless service provider. See "Network services," p. 5, for more information.
Location info sharing
 allows the phone to share position information over the 
network. For calls to emergency numbers, this position information may be used 
by the emergency operator to determine the location of the phone. The functionality 
and accuracy of this feature is dependent on the network, satellite systems, and 
the agency that receives the information. It may not function in all areas or at 
all times.
Location information is always shared with the network during emergency calls 
to the official emergency number programed into the phone, regardless of which 
setting is selected. After you place an emergency call the phone remains in 
emergency mode for five minutes. During this time, the location information is 
shared with the network.
In the standby mode, select 
Menu
 > 
Settings
 > 
Call settings
 > 
Location info 
sharing
 > 
Emergency
 or 
Location on
 > 
OK
 > 
OK
.
Emergency
—is the default profile. The phone location information is shared only 
during an emergency call to the official emergency number programed into your 
phone. The phone screen displays 
 in the upper left hand corner when in the 
standby mode.
Location on
—allows location information to be shared with the network whenever 
the phone is powered on and activated. The screen displays 
 in the upper 
left-hand corner when in the standby mode.
Anykey answer
Anykey answer allows you to answer an incoming call with a brief press of any 
key except the power, right selection, or end key.
In the standby mode, select 
Menu
 > 
Settings
 > 
Call settings
 > 
Anykey answer
 > 
On
 or 
Off
.