Nokia 7610 Manuel D’Utilisation

[ 43 ]

1. At the Start screen, press and hold the Names selection key for 2 seconds. 

A tone is heard and Please speak now is displayed.

2. After the tone, clearly speak the voice tag that you recorded previously 

into the microphone.

Note: If the voice tag is not recognized by the phone (or if you fail 

to speak a tag within 3 seconds after the tone), the message 
Name not recognized will be displayed, and then you are returned 
to the Start screen.

3. When the voice tag is recognized:

• the phone book entry will be displayed on the screen for 3 seconds 

AND

• the voice tag is replayed (via the earpiece).

• After 3 seconds, the number is dialed.

:  When the headset is connected, pressing the headset button 

momentarily at the Start screen has the same effect as pressing 
Names for 2 seconds. The alert tones will play through the headset. 
Speak the voice tag into the headset microphone. The voice tag will 
playback through the headset to confirm your choice.

You can listen to an existing voice tag (in case you forgot what you 
recorded), re-record a voice tag, or erase an existing tag.

1. At the Start screen, press the Names selection key. Scroll to Voice 

tags and press the roller.

Note: This option displays a list of only those names/numbers that 

have been assigned a voice tag. 

2. Scroll to the phone number whose voice tag you want to edit, then 

press Options.

3. Scroll to either Playback, Change, or Erase, and press the roller.

Note:  If you chose Change, press Start to begin re-recording. The new 

tag that is recorded replaces the old information.