Philips 639 Manuel D’Utilisation
Operator services
81
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls
(see page 69),
- activated the Call waiting option (see page 70).
- subscribed to this feature,
- deactivated the Call forward option for voice calls
(see page 69),
- activated the Call waiting option (see page 70).
If you receive a second call, press
,
, then you can:
•
accept the second call: the first one is put on
hold, the second one is active. If you want to
toggle between the two calls, press
hold, the second one is active. If you want to
toggle between the two calls, press
,
then
select
Switch calls
. Each time you toggle from one
call to another, the active call is put on hold and
the call which was on hold is then activated. To
introduce the new caller into a conference
press
the call which was on hold is then activated. To
introduce the new caller into a conference
press
,
and select
Conference
.
•
reject the second call
•
end the active call, then your incoming call is
ringing.
ringing.
Notes:
- If you also wish to answer the incoming call, press
- If you also wish to answer the incoming call, press
(
; to reject it, press
)
.
-
If you have activated call forwarding ‘If Busy’ (see
“Call forward” page 69), you will never receive second
calls since they are always forwarded when the line is
busy.
calls since they are always forwarded when the line is
busy.
Subscription dependent
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is
limited to two current communications (one active
and one on hold).
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is
limited to two current communications (one active
and one on hold).
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
making consecutive outgoing calls, or
create it from a multiparty call context.
You may have up to five members at the same time
and end the conference with
and end the conference with
)
. At this point all
calls are disconnected.
In order to make consecutive outgoing calls, first
initiate a normal call with the first number of the
conference. When the first member is on line, initiate
a second call as described in “Make a second call”
above. When the second call is engaged, press
In order to make consecutive outgoing calls, first
initiate a normal call with the first number of the
conference. When the first member is on line, initiate
a second call as described in “Make a second call”
above. When the second call is engaged, press
,
Answer a third call
Conference call
Conference
Philips639_APMEA_CTA_GB.book Page 81 Saturday, February 28, 2004 2:40 PM