Everpure MR-20 Fascicule

B E N E F I T S

A P P L I C A T I O N / S I Z I N G

I N S T A L L A T I O N   T I P S

O P E R A T I O N   T I P S

MR-20 Replacement Cartridge

Mineral Reduction Cartridge

MR-20 Replacement Cartridge: EV9273-69

MR-20 Replacement Cartridge: EV9273-69

Improves equipment life and performance by

removing at least 90%+ of all dissolved solids

using Reverse Osmosis Separation Technology

Especially useful on low capacity steamers,

warmers, small steam boilers and other

evaporative equipment that are not emptied each

day

Heating surfaces maintain peak heat transfer

efficiency, reducing cycle times and energy

consumption

Limits limescale build-up, which can cause

excessive machine downtime and maintenance

costs

Sanitary cartridge replacement is simple, quick

and clean. Internal filter parts are never exposed

to handling or contamination

Install vertically with cartridge hanging down

Allow 2-1/2” clearance below the cartridge for

easy cartridge replacement

Use piping materials suitable for high-purity

water after MRS System

Refer to Installation, Operation & Maintenance

Manual for cartridge flushing and RO start-up

Change MR Cartridge on a regular 24 month

preventative maintenance program

Change MR Cartridge when output capacity

diminishes by 15%, or when output pressure

becomes too low.

Always flush the MR cartridge at time of

installation and cartridge change

Proper pre-treatment is required to control MR

Cartridge (membrane) scale formation and/or

fouling.

    - Raw water hardness in excess of 7 grains per

gallon should be softened to extend cartridge life

    - The raw water may contain particulates and

the use of a pre-filter is recommended

Contact EVERPURE Technical Service for

pre-treatment recommendations

Mineral Reduction Cartridge for High TDS

Waters

Capacity: 21 Gallons per Day nominal

Ideal for:

Flash steamers, conventional steamers, cheese

melters, combi-ovens and coffee/espresso

machines

EV9273-69