Suunto D3 Manuel D’Utilisation
41
4.3. TIMER SETTINGS [TIMER D]
In this mode you can set the countdown time for the
downtimer. The downtimer also has an alarm repeat
function for continuous downtimer alarm.
downtimer. The downtimer also has an alarm repeat
function for continuous downtimer alarm.
To set the downtimer:
1.In the Setting Mode, press S three (3) times to select
the Timer Setting Mode (Fig. 4.8.)
the Timer Setting Mode (Fig. 4.8.)
2.Wait two seconds until the Timer Setting Mode
activates automatically. The SET mode and DT seg-
ments are displayed.
activates automatically. The SET mode and DT seg-
ments are displayed.
3.Press S to change the selection in the following
sequence:
-> minutes -> seconds -> alarm repeat
When the minutes and seconds are selected (blink-
ing), press - to decrease and + to increase the value.
sequence:
-> minutes -> seconds -> alarm repeat
When the minutes and seconds are selected (blink-
ing), press - to decrease and + to increase the value.
4. After the downtimer time selection, the down timer
alarm repeat is selected. The alarm repeat function
begins a new countdown after the previous one and
signals every time when the downtimer begins a new
countdown.
alarm repeat is selected. The alarm repeat function
begins a new countdown after the previous one and
signals every time when the downtimer begins a new
countdown.
A
C S
ON
Fig. 4.8. Timer Setting Mode.
A
C S
ON
Fig. 4.9. Downtimer time and
alarm repeat are selected.
alarm repeat are selected.