ZTE Z932L Manuel D’Utilisation

Explosive Environments ...................................... 80
Specifications ................................................. 81
Notes ............................................................... 82

4

5

Power off your phone before installing or replacing the 
battery. You have the option to install a microSDHC 
card of up to 32GB to expand your phone’s storage 
capacity. The microSDHC card can be installed and 
removed while the phone is turned on. Unmount the 
microSDHC card before removing it. 
1.   Place your finger in the slot at the bottom of the 

back cover to lift and remove the cover.

2.   Insert the battery by aligning the contacts on 

the battery with the gold contacts in the battery 
compartment. Gently push down on the battery until 
it clicks into place.

 Do not handle a damaged or leaking 

Li-Ion battery as you can be burned.

3.   Hold your microSDHC card with the metal contacts 

facing down and slide it into the microSDHC card 
slot until you hear a click.

4.   Press the cover gently back into place until you hear 

a click.

When you first get your new phone you’ll need to 
charge the battery. If the battery is low, there will be 
a pop-up message on the screen. As you charge your 
phone, the screen will tell you the exact battery level 
each time you wake up your phone.

 Use only ZTE-approved chargers and 

cables. The use of unapproved accessories could 
damage your phone or cause the battery to explode.
1.  Connect the adapter to the charging port. Ensure that 

the adapter is inserted with the correct orientation. 
Do not force the connector into the charging port.