Avaya 2030 Manuel D’Utilisation
Page 32 - Manager-Secretary Setup
Changing the Soft DSS Display Mode
Changing the Soft DSS Display Mode
The display mode sets how many Soft DSS keys you can have; 4 in half-line mode
or 2 in full-line mode. Note that if you change mode from half-line to full-line, you
lose the last two extensions entered.
To set the Soft DSS key display mode:
To set the Soft DSS key display mode:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter your passcode (see page 40).
3. Press MODE. The display shows the current mode.
4. To change mode, press CHANGE.
5. Press DONE. The display goes to extension entry.
6. Press PROGRAM to finish.
2. Enter your passcode (see page 40).
3. Press MODE. The display shows the current mode.
4. To change mode, press CHANGE.
5. Press DONE. The display goes to extension entry.
6. Press PROGRAM to finish.
Changing the Soft DSS Extensions
The Soft DSS features only work correctly with extension numbers. Do not set lines
or groups as Soft DSS keys.
To set a Soft DSS key extension:
To set a Soft DSS key extension:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter your passcode (see page 40).
3. Press EXTNS. to display the first number set.
2. Enter your passcode (see page 40).
3. Press EXTNS. to display the first number set.
• To cancel the number, press CANCEL.
• To display the next number, press NEXT.
• To enter a new number, press NEXT until the top-right display goes blank,
• To display the next number, press NEXT.
• To enter a new number, press NEXT until the top-right display goes blank,
then enter the number.
4. Press PROGRAM to finish.
Changing the Soft DSS Usage
When using Soft DSS Keys to make a call, the usage setting of the two phones
determines the type of call that occurs (see diagram). The phone's usage setting
affects all of its Soft DSS keys. The system treats extensions with no Soft DSS Keys
as set to NORMAL CALL.
Usage Setting
Call Type
Usage Setting
Normal or Auto Answer
< Standard / Standard >
Normal or Auto Answer
Normal
< Page / Standard >
Voice or Intercom
Auto Answer
< Direct / Standard >
Voice or Intercom
Voice
< Page / Page >
Voice
Voice
< Page / Direct >
Intercom
Intercom
< Direct / Direct >
Intercom
To set the soft DSS key usage:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter your passcode (see page 40).
3. Press USAGE. The display shows the current setting.
4. To change the current usage, press CHANGE.
5. Press PROGRAM to finish.
Page 32 - Manager-Secretary Setup
INDeX 10.0 2030/50/60 User's Guide
Changing the Soft DSS Display Mode
38DHB0002UKFN Issue 2 (07/2002)