Black Box AC216A-R2 Manuel D’Utilisation
AC211A-R2 & AC216A-R2
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
PAGE 19
4-5. FUNCTIONS DESCRIPTION (continued)
4
[AUDIO] + ENTER.
Select an item with + ENTER:
• [Auto follow]: The audio follows the video image.
• [Auto follow]: The audio follows the video image.
• [Input #1]: The input #1 audio source is permanently diffused.
• [Input #2]: The input #2 audio source is permanently diffused.
• [Input #3]: The input #3 audio source is permanently diffused.
• [Input #4]: The input #4 audio source is permanently diffused.
• [Input #5]: The input #5 audio source is permanently diffused.
• [Input #5]: The input #5 audio source is permanently diffused.
5
[FRAME] + ENTER.
Select an item with + ENTER:
5-1
[Record frame] + ENTER.
• [Captured input]: Allows to capture the frame + ENTER.
5-2
[Display frame] + ENTER.
• [Off]: Allows to switch off the frame.
• [Auto]: Allows to display the frame in case of lost of input signal on the selected input.
5-3
[Delete frame] + ENTER.
Allows to delete the frame stored.
Allows to delete the frame stored.
6
[CONTROL] + ENTER.
6-1
[Versions] + ENTER.
Version _._: update version.
Version _._: update version.
I: Identification number.
K, S, O, V: Internal firmware versions.
6-2
[Key locking] + ENTER.
Select an item with and change the mode with ENTER.
• [All]: Locks/unlocks all the front panel switches.
Select an item with and change the mode with ENTER.
• [All]: Locks/unlocks all the front panel switches.
• [Menu]: Locks/unlocks the LCD CONTROL switches.
• [Input]: Locks/unlocks the INPUT SELECTION and FREEZE switches.
6-3
[2:2 pull down] + ENTER.
Select an item and validate with ENTER.
• [Off]: Disable the 2:2 pull down correction.
• [Auto]: Automatic recognition and correction of the 2:2 pull down.
Select an item and validate with ENTER.
• [Off]: Disable the 2:2 pull down correction.
• [Auto]: Automatic recognition and correction of the 2:2 pull down.
• [On]: Allows to switch off the frame.
6-4
[Black delay] + ENTER.
This function allows adjusting the duration of the black during a transition. Select en item and validate with
ENTER.
This function allows adjusting the duration of the black during a transition. Select en item and validate with
ENTER.
• [Short]: Delay = 0 second.
• [Medium]: Delay = 1.5 seconds.
• [Long]: Delay = 3 seconds.
6-5
[Stand-by] + ENTER.
When the device any more detect a signal on the selected input, this one is set in the STANDBY mode after the
duration of your choice. Select a duration with + ENTER.
NOTE: A long push on the ENTER button allows to manually activate the STANDBY mode. A short push on a
When the device any more detect a signal on the selected input, this one is set in the STANDBY mode after the
duration of your choice. Select a duration with + ENTER.
NOTE: A long push on the ENTER button allows to manually activate the STANDBY mode. A short push on a
front panel push button allows to wake up the device.