Humminbird 798ci Manuel D’Utilisation
151
North Reference
Settings: True, Magnetic; Default = True
North Reference allows you to have bearings displayed with one of two
orientations: True North or Magnetic North.
orientations: True North or Magnetic North.
Waypoint Decluttering
(Advanced)
Settings: Off, On; Default = On
Waypoint Decluttering allows you to set the declutter feature On or Off. When
two or more waypoints overlap, or are displayed close together on a chart view,
the screen will automatically declutter—waypoint names will shorten and the
waypoint icons will change into small blue icons. Select Off to display
waypoints at regular size.
two or more waypoints overlap, or are displayed close together on a chart view,
the screen will automatically declutter—waypoint names will shorten and the
waypoint icons will change into small blue icons. Select Off to display
waypoints at regular size.
Trolling Grid Rotation
Settings: 0° to 89°, Default = 0°
Grid Rotation allows you to set the orientation of the trolling grid in degrees,
where a setting of 0° displays a standard North, South, East, West alignment.
See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for
information.
where a setting of 0° displays a standard North, South, East, West alignment.
See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for
information.
NOTE: This feature may appear as either Trolling Grid Rotation or Grid Rotation,
depending on your model.
depending on your model.
Trackpoint Interval
Settings: 1 second, 5 seconds, 10 seconds, 15 seconds, 30
seconds, or 60 seconds; Default = 1 second
seconds, or 60 seconds; Default = 1 second
Trackpoint Interval allows you to select the time period between trackpoints.
The current track can only contain up to 20,000 trackpoints, so longer time
periods cause the track to extend back further in time, but will be less detailed.
The current track can only contain up to 20,000 trackpoints, so longer time
periods cause the track to extend back further in time, but will be less detailed.
Trackpoint Interval works in conjunction with Track Min Distance. Both
conditions must be met before a trackpoint is added to the current track. During
slow travel or drift, setting both Trackpoint Interval and Track Min Distance to
small values will allow you to increase the track resolution.
conditions must be met before a trackpoint is added to the current track. During
slow travel or drift, setting both Trackpoint Interval and Track Min Distance to
small values will allow you to increase the track resolution.
Navigation Menu Tab