Petsafe HBK11-11926 Manuel D’Utilisation

 

 5 

•  (4) Corner Connectors
•  (4) Tube A
•  (4) Tube  B

1. Begin at any corner. Assemble corner 

connector to tube B. Press button on 

connector and insert into tube ensuring that 

the hole in the tube lines up with the button 

on the connector. It should lock into place. 

Slip swedged ends of the tubing into the next 

piece of tubing.

2.  Assemble tube A to tube B. Continue assembling 

connectors and tubes. (See Diagram)

•  (4) Tube A
•  (4) Tube  B
•  (4) Tube  E 
•  (4) Corner Connectors

1. Connect tube E to each of the 

bottom corner connectors. 

(See Diagram) 

2. Insert corner connector 

to each tube E.

3. Assemble remaining tubes 

per diagram.

•  (1) Tube G
•  (4) End Rail Clamps
•  (2) 

5

/

16

 x 2 inch Carriage 

Bolts with Nut

1.  Install the gate post 22 ¼ 

inches (57 cm) to either side 

of the corner upright. 

2.  With the nut on the outside, 

clamp post to the top and 

bottom frame rails.

3.  Check that post is straight 

up and down. Confirm that 

all nuts are tight.

22 ¼ inches

(57 cm)

1

2

3