Sharp DV-L70BL Manuel D’Utilisation
73
GB
2
Press AUDIO to cycle through the available
channels and select the one you want.
channels and select the one you want.
• In the case of a video CD or audio CD,
each press of
AUDIO
cycles through
the channels in the following sequence:
L+R
L+R
→
L
→
R.
Helpful Hints
• With a DVD player, use ' and " to scroll through the channel numbers.
• The channel number selection display remains on the screen for about 10
• The channel number selection display remains on the screen for about 10
seconds.
To play DTS/MPEG audio using a DTS/Audio MPEG digital surround
decoder
decoder
1
Connect the DVD player to the DTS/Audio MPEG digital surround decoder
(see page 32).
(see page 32).
2
Press AUDIO to select the DTS/MPEG mode.
• You must use a DTS digital surround decoder (see page 32) in order to play DTS
audio. Playing back a DTS audio disc on the DVD player alone will not produce
correct audio output, even if you select the DTS mode.
correct audio output, even if you select the DTS mode.
Audio Selection (DVD, Video CD only)
3 / 3
LPCM
L
R