EAW MQV1394e Manuel D’Utilisation

Page de 2
SPECIFICATIONS MQV1394e
FEATURES
PHYSICAL
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQV1394e/0002691/002/2 pp   October 2003
Printed in USA
FEATURES
DESCRIPTION
PERFORMANCE
APPLICATION
Calculated Maximum Output (dB SPL @ 1m)
LF Peak/Long Term
128/122
MF/HF Peak/Long Term
140/134
MF Peak/Long Term
141/135
HF Peak/Long Term
134/128
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal
90
Vertical
40
Recommended High-Pass Frequency
24 dB/Octave
50 Hz
Frequency Response
±3 dB
70 Hz to 15 kHz
-10 dB
50 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF
95
MF/HF
108
MF
109
HF
106
Impedance (Ohms)
LF
8
MF/HF
8
MF
8
HF
8
Power Handling, AES Standard (Watts)
LF 550
MF/HF
400
MF
400
HF
150
LF Subsystem 1x 15-in woofer
MF Subsystem 1x 10-in horn loaded cone
HF Subsystem 2-in exit/3-in voice coil com-
pression driver on constant 
directivity horn
Configuration Three-way, full range
Powering Bi- or Tri-amplified
Enclosure Materials Exterior grade Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors Terminal barrier strip
Suspension Hardware 16x 3/8”-16 threaded mounting 
points (4 each on top, bottom 
and sides)
Grille Powder coated perforated steel
Dimensions inches
millimeters
Height (front) 26.65
677
Height (rear) 15.3
389
Width 56.25
1429
Depth 25.59
650
Trapezoid Angle 12.5 Degrees per Side
Weights
pounds
kilograms
Net Weight 215
97.7
Shipping Weight 240
109.1
• Full-range, 3-way system 
• 15-in LF; 10-in horn-loaded MF; 2-in exit Neodymium HF  
• 90° x 40° beamwidth
• Horizontally configured to create vertical arrays
A 3-way, full-range system in a vented trapezoidal enclosure.
Includes a slot-loaded 15-in woofer, a horn-loaded 10-in MF
cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm
Neodymium compression driver.  The MF and HF horns provide
a nominal 90° x 40° beamwidth. An internal passive crossover
with jumpers on the input panel allows user selection of
either bi-amplified or passive operation.  In either case digi-
tal signal processing is required to achieve specified perform-
ance. The enclosure features a comprehensive system of 3/8”-
16 threaded suspension points.
The MQV1394e combines the MQ Series LF/MF/HF components
into a full-range, single-enclosure loudspeaker.  It is horizon-
tally configured for arraying in vertical columns. This arrange-
ment is typically used in sports arenas and other venues where
the array must address wide, vertical audience angles. The
MF/HF horns in the MQV1394e feature a rigid but well-damped
construction using wood veneer backed by structural foam. A
no-compromise design means the mid and high frequency
horns are truly large enough to provide optimal pattern con-
trol throughout each passband.
Application Usage: Install
Houses of Worship
Auditoriums
Theatres
Arenas
Performing Arts Centers 
Stadiums