EAW JFX560 Manuel D’Utilisation

Page de 2
SPECIFICATIONS JFX560
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
JFX560/0004642/2 pp
September 2002
Printed in USA
Part Number
0002880
System Configuration
2-way, full-range
Powering Switchable: 
Passive 
LF/HF 
crossover or bi-amplified
LF Subsystem  1x 15-in, vented
HF Subsystem
1x 1.4-in exit/3-in voice coil 
neodymium compression driver 
on CD horn
Controls (switches, knobs)
Powering mode switch
Recommended High-Pass 
Frequency (24 dB/octave)
55 Hz
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear resistant textured black paint
Connectors
2x Neutrik NL4 Speakon
Hardware
Pole mount cup (bottom); 2x 3-
position fly track (bottom); 1x 
11-position fly track (top); 4x 
5/16”-18 suspension points for 
Omnimount Series 300 (rear)
Grille
Powder coated perforated steel, 
foam backed
Frequency Response (1 W @ 1 m)
±3 dB
80 Hz to 15 kHz
-10 dB
55 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Full Range
98
LF
98
HF
104
Impedance (Ohms)
Full Range  8
LF
8
HF
8
Power Handling (Watts, continuous)
Full Range
500
LF
800
HF
200
Calculated Maximum Output (dB SPL, @ 1m)
Full Range Peak
131
LF/HF Peak
133/133
Full Range Long Term
125
LF/HF Long Term
127/127
Nominal Coverage Angle / -6 dB points (degrees)
Horizontal
60
Vertical
45
PHYSICAL
PERFORMANCE
• Ideal size and performance for rigorous all-purpose use
• 60° coverage permits creation of optimized horizontal 
arrays
• HF compression driver and vented LF for fully professional 
performance
• Asymmetric enclosure provides multiple mounting angles
• Pole mount cup & fly track, plus Omnimount®    
Series 300 or similar mounting points 
• Passive or bi-amplified operating modes
The JFX560 is a 2-way multi-purpose loudspeaker. Its multi-
functional design adds considerably to its value as a full-
range loudspeaker.  Combining high output and natural repro-
duction, it is specifically outfitted to serve in a variety of
both portable and permanent applications.  The asymmetric
enclosure provides typical angles needed for ceiling and wall
mounting as well as for stage monitor operation.  For perma-
nent  installation, enclosure hardware includes mounting
points for an Omnimount® Series 300 or similar bracket and
fly track for suspension.  Provisions for portable use include a
pole mount cup, top/bottom fly track for rigging, and handles
integral to the enclosure that facilitate handling and trans-
port. The JFX560 is particularly suitable as a near field main
loudspeaker or as a fill/delay element in larger systems.
While the JFX560 is well suited as is for many applications,
the addition of a subwoofer expands its capabilities for more
demanding applications such as for houses of worship, theaters,
and band PA. Six year warranty.
• Portable systems or permanent installations
• Wall and ceiling mountings
• Ideal size and output for wide range of 
program material
• Main PA reinforcement in medium- to 
large-sized spaces
• Downfill for flown clusters
• High SPL stage lip / delay fill
• A/V and/or surround sound installations
• Voice & F/X reinforcement in themed attractions
FEATURES
DESCRIPTION
APPLICATION