Peerless Industries ACC-SB Manuel D’Utilisation
3 of 5
ISSUED: 03-08-11 SHEET #: 125-9197-2 05-16-11
2
Attach reinforcement bracket (D) to adapter bracket
(A) using two M5 x 6 mm socket pin serrated
washer head screws (F).
(A) using two M5 x 6 mm socket pin serrated
washer head screws (F).
3
Attach adapter bracket (A) to speaker bracket (B)
using two M5 x 6 mm socket pin serrated washer
head screws (F).
using two M5 x 6 mm socket pin serrated washer
head screws (F).
B
F
F
4
NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 3/8" socket pin screw (H), and two
1/4 fl at washers (I).
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 3/8" socket pin screw (H), and two
1/4 fl at washers (I).
4
NOTE: Make sure that speaker wires are
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 1/2" socket pin screw (G), and two
1/4 fl at washers (I).
connected as indicated in speaker instructions
before attaching speaker bracket (B).
Secure speaker bracket (B) to speaker using two
1/4-20 x 1/2" socket pin screw (G), and two
1/4 fl at washers (I).
MOTION 6
MYTHOS-XTR50
B
B
G
H
SPEAKER WIRES
I
I
Attaching Reinforcement Bracket and Speaker Bracket
Attaching Speaker
SPEAKER WIRES