Sharp DK-AP7N(S) Manuel D’Utilisation

Page de 16
E-3
2009 February 27 
DK-AP7N_A6_EN_SCA.fm
ENGLISH
DK-AP7N(S)
DK-AP7N(W)
DK-AP7N(R)
General Information
Precautions
„
General
z
Do not place anything on top of the unit.
z
Do not expose the unit to moisture, to temperatures higher 
than 60°C (140°F) or to extremely low temperatures.
z
If your system does not work properly, disconnect the AC/DC 
adaptor from the wall socket. Plug the AC/DC adaptor back 
in, and then turn on your system.
z
SHARP is not responsible for damage due to improper use. 
Refer all servicing to a SHARP authorised service centre.
z
No naked flame sources, such as lighted candles, should be 
placed on the apparatus.
z
Attention should be drawn to the environmental aspects of 
battery disposal.
z
The apparatus is designed for use in moderate climates.
z
This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this
unit. Using this product with a higher voltage other than that
which is specified is dangerous and may result in a fire or other
type of accident causing damage. SHARP will not be held
responsible for any damage resulting from use of this unit with
a voltage other than that which is specified.
„
Volume control
The sound level at a given volume setting depends on speaker
efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels. Do not turn the volume on
to full at switch on. Listen to music at moderate levels. 
z
Please ensure that the equipment is 
positioned in a well-ventilated area 
and  ensure that there is at least
10 cm (4") of free space along the 
sides, top and back of the equipment.
z
Use the unit on a firm, level surface 
free from vibration.
z
Keep the unit away from direct 
sunlight, strong magnetic fields, 
excessive dust, humidity and 
electronic/electrical equipment 
(home computers, facsimiles, 
etc.) which generate electrical 
noise.
z
In case of an electrical storm, unplug the unit for safety.
z
Do not use an external power supply other than the 6V DC 
supplied with this unit as it may be damaged.
10 cm (4")
10 cm (4")
z
Hold the AC/DC adaptor by the head when removing it from 
the wall socket, as pulling the lead can damage internal wires.
z
The AC/DC adaptor is used as a disconnect device and shall 
always remain readily operable.
z
Do not remove the outer 
cover, as this may result in 
electric shock.  Refer internal 
service to your local SHARP 
service facility.
z
The ventilation should not be impeded 
by covering the ventilation openings 
with items, such as newspapers, 
tablecloths, curtains, etc.