iHome iP88 Manuel D’Utilisation

5

Using the Line-in Jack
You can play any iPod without a docking port or other MP3 player or portable audio device through the iP88 via the Line-in Jack.
1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the other end of 

the patch cord into the iP88 Line-in Jack located on the back of the unit.

2. Press the Radio Button until “Line-in” appears in the lower part of the display.
3. Turn on and play your device.
4. Turn the Volume Wheel to adjust the system volume. 
5. Press the EQ Button to select and turn the Set Wheel to set Treble, Bass,3D Sound on/off and Left/Right Balance. 
6. To turn off the unit, press the      Button. Please remember to turn off your device, too.

Sleep mode lets you sleep to your iPhone/Pod or radio, gradually lowering the volume until the unit shuts off at the selected time.
1. Press the Sleep Button to enter sleep mode. The sleep time will show in the lower display.
2. Press the Sleep Button again as needed to adjust the sleep timer from 120, 90, 60, 30 or 15 minutes.
3. When the display changes back to show the real time, press the Sleep Button once to show the sleep time remaining. Pressing it 

again will change sleep time to next lowest increment.

4. iP88 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the normal volume. The 

sleep volume will remain at that level the next time you enter sleep mode until controls are changed.

5. To stop listening at any time, press the      Button to turn unit off.

During normal operation, press the Snooze/Dimmer Button to control the brightness of the LCD display.

The iP88 uses a backup battery system to provide continuous alarm operation and clock settings in the 
event of a power failure. If the Battery Low Icon located on the right of the display is flashing, it is time 
to replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all settings 
may be lost during battery replacement.

Open the battery compartment cover located on the bottom of the unit. Insert 2 “AA” batteries as indicated.

We recommend the use of alkaline batteries for longer life.

•  Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures & 

not handled appropriately.

•  Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not mix with used or other battery 

types, or store with hazardous or combustible materials.  

•  Store in cool, dry, ventilated area. 
•  Follow applicable laws and regulations for transport and disposal.

•  Do not mix with used or other battery types/brands 
•  Replace all batteries at the same time 
•  Do not open batteries 
•  Do not dispose of in fire
•  Do not heat above 75ºC (167ºF) 
•  Do not expose contents to water 
•  Do not charge or recharge 
•  Do not install backwards