iHome IP23 Manuel D’Utilisation

Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1.  Once an alarm is set, press the associated alarm button to view the currently set alarm time and to toggle the alarm on  

 

(icon) or off (no icon).

2.  To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is armed, the related  

 

alarm icon will appear on the right side of the display.

Resetting the Alarm to Come on the Next Day
1.  When the alarm is sounding, press the       Button to stop the alarm and reset it to come on the following day. You can  

 

also press the alarm button for the sounding alarm (alarm 1 or alarm 2) to reset it.

Snooze Operation
1.  By default, snooze lasts for 9 minutes. To adjust the snooze time, press and hold the Snooze/Dimmer Button until the  

 

display flashes. Press the      or      Button to set the snooze timer from 1 to 29 minutes.

2. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the set  

 

snooze time. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm
The unit has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure.

Charging your iPhone/iPod
Gently dock your iPhone/iPod using the 

insert for your iPhone/iPod (see Qucik Start guide). Using an insert provides the best 

stability and protection, but you can safely dock your iPhone/iPod without an insert.

1.  While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Back  

 

up batteries will NOT charge iPhone/iPod. Note that non-docking iPhone/iPod models will NOT charge.

1.  Dock your already playing iPhone/iPod. The unit will automatically turn on and after a few moments you will hear the audio  

 

playing from your iPhone/iPod, starting softly and gradually increasing to the set volume. 

If the volume on the playing track is too low, the unit may not detect that your iPhone/iPod is in play mode. If this  

 

happens, press the       Button on the main unit to play it.

2.  When the iPhone/iPod is docked and in standby mode, press the      Button on the unit to play it. The      will appear on  

 

the display, indicating iPhone/iPod play mode.

3. Press the       Button to pause play; press again to resume it.
4. Press the 

Volume       and Volume      Button to adjust the system volume.

5. Press the      or      Button on the  unit to go to the next or previous track. Press and hold while a track is playing for high  

 

speed forward or reverse music search of the current track. 

6.  To turn off the unit, press the      Button. The iPhone/iPod will continue charging while in the dock.

5