Silvercrest KH 2281 Manuel D’Utilisation

- 5 -

Mark the four points for the drillholes with 
a pencil.

Mark the drillhole with a mandril. 

Firmly secure the mounting plate 

with the

supplied screws.

Hold the kitchen radio slanted, with the two 
recesses in the retaining lugs on the mounting
plate 

. Press the kitchen radio upwards until

it audibly engages.

Setting up the kitchen radio

Do not set the kitchen radio up without the mounting
plate 

. Otherwise the speakers are covered and

the sound is scarcely audible.
To set up the kitchen radio with the enclosed mounting
plate 

:

Simultaneously press the two retaining levers 

on the back of the appliance down. Push the
mounting plate 

back and remove it.

Push the two retainer lugs on the mounting plate 

into the recesses on the lower rear side of the
kitchen radio. 

Firmly press the front part of the mounting plate

down until you hear it engage. You can now

set up the radio.

To disassemble the mounting plate 

, grip the

mounting plate 

from below with the thumbs and

press it forwards and up until it disengages. You can
now remove the mounting plate 

.

Commissioning

Inserting the back-up batteries

The back-up batteries ensure that the programmed
time, date, alarm time and set SDAs (Special Day
Alert) are not erased in the event of a power failure.
For this, you require two 1.5V batteries of type
AAA. They are not supplied with the appliance.

Open the lid of the battery compartment 

on the underside of the kitchen radio.

Insert the batteries. Make sure the polarities
are correct.

Close the lid of the battery compartment 

.

The lid must audibly engage.

Note:

Providing mains power

•

Insert the plug into a power socket. In the 
display, the time is indicated by "00:00.

00

".

To be able to use the alarm functions of the radio,
first of all programme in the date and time, as 
described in the following section.

IB_KH2281_Ar5027_LB6  15.07.2008  9:04 Uhr  Seite 5