Roberts Radio ecologic 2 Manuel D’Utilisation

Your radio will play stereo broadcasts in stereo (via headphones) so long 
as the received signal is of adequate strength. However, as a stereo 
signal becomes weaker the audio signal will become poorer. It may be 
preferable to force the radio to play the station in mono in order to reduce 
the level of audio noise.

1. Press 

the 

On/Off button to switch on your radio.

2.  Tune to the required FM radio station as previously described.

3.  Press and hold the Info/Menu button until the display shows "Mono 

Override" on the lower line. The upper line will show "Override Off" if 
the radio is in the Auto-Stereo mode.

4. Press 

the 

Select button to switch on the Mono Override. While this 

setting is engaged, the radio will play the current station in mono 
whether listening via headphones or the loudspeaker.

 

Mono Override is a temporary setting and is applied to the currently 
tuned station only. It is cancelled automatically by tuning to another 
radio station.

5.  If you wish to cancel Mono Override while listening to the currently 

tuned radio station, press and hold the Info button until the display 
shows "Mono Override" on the lower line. The upper line will show 
"Override On" if the radio is in the Mono Override mode. 

 

6. Press 

the 

Select button to switch off the Mono Override. The radio 

will play then play the current station in stereo through headphones 
if the signal is suffi ciently strong.

1

3,5

4,6