Smeg 129530 Manuel D’Utilisation
129530
- Open the dryer door by pushing the left-hand side of the
door towards the appliance.
- Sort the laundry according to the type of fabrics.
Do the buttons and zippers, tie the strings and pull out
the pockets.
Very delicate laundry should be put in a special
protective sack.
It is suggested to load the drum with items of different
sizes.
Do not load drip-wet laundry into the dryer (min. 800
rpm).
Pay attention to the labels on the clothes, indicating
the recommending drying mode (see table of textile
treatment symbols on the last page).
treatment symbols on the last page).
- Insert the laundry into the drum (prior making sure that the
drum is empty).
- Close the dryer door.
- Starting the appliance
1. Name of program, 2. Moisture level, 3. Additional functions
The appliance is switched on by turning the jog button (A) to
the desired program (depending on the type of laundry, degree
of moisture, and/or drying time). Display is lit and indicates the
program, selected by the jog A (in some models there is a signal
LED on the A button next to the selected program).
If you fail to do anything within 5 minutes after starting the
appliance, the display will go blank. During the drying process
the display is illuminated and is switched off after the cooling
stage.
the desired program (depending on the type of laundry, degree
of moisture, and/or drying time). Display is lit and indicates the
program, selected by the jog A (in some models there is a signal
LED on the A button next to the selected program).
If you fail to do anything within 5 minutes after starting the
appliance, the display will go blank. During the drying process
the display is illuminated and is switched off after the cooling
stage.
- Selecting language
Press button C (SELECTION), and simultaneously turn the
program selector jog A to the fi rst clockwise position. Display
indicates the default setting of language. Use button C
(SELECTION) to select the desired language. Last selected
language is stored.
program selector jog A to the fi rst clockwise position. Display
indicates the default setting of language. Use button C
(SELECTION) to select the desired language. Last selected
language is stored.
Drying procedure
Drying procedure
Operating the dryer
Operating the dryer
9