Haier HLP141E Manuel D’Utilisation

English

CARE AND CLEANING GUIDE

Clean buildup such as lint on filters after each use, otherwise it will affect the

performance of your dryer.

Cleaning of Lint Trap and Filters

The lint filter must be always used for drying.

•

It must be cleaned each time before or after each use.

•
1. Remove the Exhaust venting casing

containing the filters.

Use four finger grabbing holes in middle of the

exhaust vent casing center to pull from the drum.

Remove the filters by pulling straight out.

The exhaust vent casing contains the ‘Lint

filter’ and ‘Exhaust filter’, as shown in figure 1.
2. Cleaning the filters from lint

Separate ‘exhaust vent casing’,’lint filter’ and ‘exhaust

filter’ and clean the lint off the filter and exhaust filter

with a soft brush or a small vacuum cleaner. (as shown

in figure 2) or wash it with water if still dirty.

Dry completely before use and do not damage the filters.
3. Install the filters

After cleaning the filters, assemble filters in the

order of ‘exhaust vent casing’,’lint filter’ and

‘exhaust filter’ (as shown in figure 3).
4. Align the recesses center of the ‘exhaust vent

casing’ to the center of drum and make sure that

it is firmly inserted.

Please unplug the power cord when cleaning the Dryer.

•

Clean the interior drum or dryer housing with a damp soft cloth.

•

NEVER USE YOUR DRYER WITHOUT

THE LINT FILTERS INSTALLED.

Do not put water directly on dryer.

•

Do not use thinner, gasolene or alcohol.

•

Do not use any type of spray cleaner to clean the interior.

•

Remove everything from drum before drying the next load.

•

Clean cabinet with mild soap and water only. Do not use

•

harsh or abrasive cleaners, as this could damage the dryer.

WARNING!

Figure 2

Figure 3

Exhaust

vent casing

The filter is in the rear

of the drum

Figure 1

Lint

filter

Exhaust

filter

Lint Filter

Exhaust Filter Small Vacuum

cleaner

Brush Lint

Exhaust

vent casing

Oil

Thinner

Benzene