Whirlpool W10240583C-SP Manuel D’Utilisation

Put power supply cord through the strain relief. Be sure that 

the wire insulation on the power supply cord is inside the 

strain relief. The strain relief should have a tight fit with the 

dryer cabinet and be in a horizontal position. Do not further 

tighten strain relief screws at this point.

4-wire receptacle (NEMA 

type 14-30R)

4-prong plug

Spade terminals with 

upturned ends

Ring terminals

ImPoRTAnT: A 4-wire connection is required for moble homes 

and where local codes do not permit the use of 3-wire connections.

E

B

A

C

E

B

F

A

Connect ground wire (F) (green or bare) of power supply cord  

to external ground conductor screw (A). Tighten screw.

Remove center terminal block screw (B). Remove neutral 

ground wire (E) from external ground conductor screw (A).

Connect neutral ground wire (E) and neutral wire (white or 

center) (C) of power supply cord under center terminal block 

screw (B). Tighten screw.

Power supply cord 4-wire receptacle

(NEMA Type 14-30R):

Go to 4-Wire Power Supply Cord  

Connection on this page.

Power supply cord 3-wire receptacle

(NEMA Type 10-30R):

Go to 3-Wire Power Supply Cord  

Connection on page 10.