ARRI 416 Manuel D’Utilisation

The magazine throat assembly 

a

 can be 

disassembled for cleaning.

•  Remove the two screws beside the top and bottom 

corners of the pressure plate 

a

.

•  Open the take-up side door and fully loosen the screw 

between the two sprocket rollers 

a

.

•  Flip the magazine over so the screw drops out of 

engagement with the pressure plate assembly. The 

screw is captive so it will not fall out and get lost 

a

.

•  Pull out the pressure plate assembly 

a

.

•  Clean the film running surfaces 

a

 and guide 

rollers 

a

 with a brush.

•  Put the pressure plate assembly back in place. (It fits 

accurately on dowel pins).

•  Refit and tighten the two screws.

screw

screw

sprockets

running surfaces

pressure plate assembly