Canon 300X Manuel D’Utilisation

34

T Program AE 

•

Compose the shot and press the
shutter button fully.

The Difference Between <T> and <Y>

• The shutter speed and aperture value are set in the same way in

both modes.

• The following features can be used in the <T> mode, but not in

the <Y> mode.

• In the Program AE mode, you can freely change the shutter speed

and aperture value combination (program) set by the camera while
retaining the same exposure. This is called program shift.

• To shift the program, press the shutter button halfway and turn the

<l> dial until the desired shutter speed or aperture value is
displayed.

• Program shift is canceled automatically after the picture is taken.
• Program shift cannot be set when the built-in flash is used.

· Manual selection of AF mode

and AF point

· Film advance mode selection
· Program shift
· Exposure compensation
· AEB
· Custom Function

· Depth-of-field preview
· AE/FE lock with the <j> button
· Multiple exposures
· Built-in flash manual firing and

flash OFF

· High-speed sync 

(with EX-series Speedlites)

• If “

” and the maximum aperture value blink, it

indicates underexposure. Use flash.

• If “

” and the minimum aperture value blink, it

indicates overexposure. Use an ND filter to reduce
the light entering the lens.