JVC GZ-MG365 Manuel D’Utilisation

Page de 42
33
ENGLISH
FURTHER INFORMATION
The camera is a microcomputer-controlled 
device. External noise and interference (from 
a TV, a radio, etc.) might prevent it from 
functioning properly.
The following phenomena are not 
malfunctions.
 The camera heats up when it is used for a 
long time.
 The battery heats up during charging.
 When playing back a video fi le, the 
image stops momentarily or the sound is 
interrupted at junctions between scenes.
 To solve the problem, fi rst follow the 
instructions below.
 If the problem is not solved, reset the 
camera. (
 below)
 If the problem persists, please consult your 
nearest JVC dealer.
L
 To  reset the camera
1)  Close the LCD monitor to turn off the 
camera and remove the power supply 
(battery pack or AC adapter) from the 
camera, then reattach it.
2)  Select [FACTORY PRESET] from the 
MENU.
Trouble
Action
Po
w
e
r
No power is supplied.
 Connect the AC adapter securely.
 Detach the battery pack once again and reattach it fi rmly.
 Replace the dead battery with a fully charged one.
14
14
The power does not 
turn on, or the battery 
operation time is 
extremely short even 
after the battery is fully 
charged.
 Make sure to use the camera under appropriate operating 
temperatures.
 The battery is worn out and needs to be replaced. Please 
purchase a new one.
36
The access/charge 
lamp on the camera 
does not light during 
charging.
 Charging may stop in places subject to extremely high/low 
temperatures to protect the battery. It is recommended 
to charge it in places with a temperature of 10°C to 35°C 
(50°F to 95°F).
 When the battery is already fully charged, the lamp does 
not light. Check the remaining battery power.
15
Recor
ding
Recording cannot be 
performed.
 Recording medium is full. Delete unnecessary fi les or 
replace the microSD card.
 Select the recording medium properly.
20
During recording, the 
date/time does not 
appear.
 Touch the DISP button once.
13
During video recording, 
the 
7REC indicator 
fl ashes.
 The temperature of the camera is increasing. If the 
camera continues to heat up, recording may be stopped 
to protect the recording medium. In this case, turn off the 
power, and then wait until the camera cools down.
Digital zoom does not 
work.
 Change the settings in [ZOOM].
 Digital zoom is not available in the still image recording 
mode.

Troubleshooting