JVC GV-DS2 Manuel D’Utilisation

EN 

Use the Step by Step Capture mode when you want to:
•Capture a smaller number of images
•Confirm the images being captured.

•Make sure all units are properly connected

(

Z

 p. 12).

•Click "Image Format" in "Set-up" and select

the desired format (

Z

 p. 32).

Open the menu bar and click "Set-up" —
"Capture Mode" — "Step by Step".
•The Step by Step Mode is entered.

Click "CAPTURE" on the image you want
to capture.
•Click "Window" — "VCR" to have the

VCR scan the picture in the VCR
Operate window (

Z

 p. 25).

•When you press the CAPTURE button,

full image data (768 x 552 pixels) is
captured into the Video Capture
Docking Station memory. Index image
data (80 x 60 pixels) is simultaneously
transferred to the computer.

Index image data is transferred to the
computer.
•The message "No.1 index image being

transferred" appears during data
transfer.

The message "Transfer the full image ?
Yes/No" appears.  Click "Yes". Full image
data (768 x 552 pixels) is transferred to
the computer.
•You cannot use the TRANSFER button

in Step by Step Transfer mode.

The full image data is transferred to the
computer.
•The message "No.1 image being

transferred" appears during data
transfer.

Repeat steps 2 through 5 as required.

NOTES:
•Index image/Full image data are

transferred to the image display boxes
bordered in green.  Click and select the
desired box(es).

•When transferring full image data using

the Bitmap image format (

9

.bmp), the

transfer takes a very long time, causing
the video source unit to stop playback
automatically.