JVC GV-DS2 Manuel D’Utilisation

 EN

v Appears when:

m Action:

v Not connected to COM port set by JLIP Initialize.

m Check the COM port number and connector and

retry JLIP initialization.

v Connected devices are not turned on.

v Selected COM port is not connected properly.

m Make sure connection is proper and carry out JLIP

initialization. Then turn on this unit and the
connected devices.

v Video unit is brought to STOP or ends playback

during automatic capture.

m Check the auto capture setting.

v Full image data (768 x 552 pixels) cannot be

captured if you start auto capture at the beginning
of the tape. Video capture stops if video playback
is stopped.

m Start video capture 20 seconds after the start of the

recording.

v Tape is too short to match the preset number of

images or there is a section of non-recorded tape.

m Click "OK", check the tape length and re-enter the

number of images to be captured. Use a fully
recorded tape.

20

20, 21

—

30