JVC GYHM150U Manuel D’Utilisation

Applicable to: Camera mode, Media mode

Connect the headphone.

Connect the headphone to the headphone (

) jack.

Set the headphone sound to mixed sound or stereo

sound.

Set using [Audio Monitor] in the [A/V Out] menu.
(

AMixB/AStereoB) (A Page 73)

Adjust the headphone’s audio level. (Linked to built-in

speaker)

Operate with the [ADJ./VOL.] knob.

Memo :

● The built-in speaker is usable only in the Media mode. Audio

is not output from the built-in speaker during Camera mode.

● Audio level in the Camera mode and Media mode can be

adjusted separately.

● When in the Media mode, the volume of the headphone and

speaker are adjusted at the same time.

● The built-in speaker cannot be used when the [HDMI]

terminal, [A/V Out] terminal, or headphone jack is

connected.

Applicable to: Camera mode

Displaying the Time Code/User’s Bit

Menu setting

Set [LCD/VF] menu

B[Status Display]B[TC/UB] to

ATCB

AUBB. (A Page 72)

● ATCB: Displays the time code.

● AUBB: Displays the user’s bit.

Recording the Time Code

The time code of the camera recorder’s built-in time code
generator as well as user’s bit can be recorded. The time
code generator comes in the preset and regeneration
modes. When in the preset mode, you can set the time code
and user’s bit freely. (

A Page 40)

Recording time code and user’s bit in the preset
mode

Set [TC Generator] in the [TC/UB] menu to

ARec RunB or

AFree RunB. (A Page 69)

● ARec RunB:The time code operates in the run mode only

during recording.

● AFree RunB:The time code operates in the run mode at all

times.

Recording time code in continuation of the
recorded time code on the SDHC/SDXC card

Set [TC Generator] in the [TC/UB] menu to

ARegenB.