JVC GYHM150U Manuel D’Utilisation
66
* Default values are indicated in bold characters.
Item
Setting Values
Function
For assigning the FAW (Full Auto White Balance) function to a position on the [WHT.BAL]
selection switch.
The white balance mode is fixed at
selection switch.
The white balance mode is fixed at
AFAWB when the [FULL AUTO] button of the camera recorder
is set to
: FAW function is not assigned.
: Assigns FAW to the PRESET position.
(Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB)
For setting the speed of zoom operation with the set lever (on the LCD monitor) and remote
control.
A-2B is the slowest setting and A1B is the fastest setting.
control.
A-2B is the slowest setting and A1B is the fastest setting.
By assigning one of the following functions to each of the [USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/[ZEBRA/5]/[REC/
6] buttons, these buttons can be used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.
6] buttons, these buttons can be used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.
(Default values USER1: Focus Assist, USER2: TC/UB, LOLUX/3: Lolux, C.REVIEW/4: Clip Review, ZEBRA/5:
Zebra, REC/6: Rec)
Zebra, REC/6: Rec)
Memo :
● The [REC/6] button is set to ARecB by default, and can be used to start/stop recording. The ARecB function can only
be assigned to the [REC/6] button.
Setting Values
Description
No function is assigned.
Assigns the function of appending/deleting OK marks while recording a clip. This function
operates during shooting. (
operates during shooting. (
Assigns the function of splitting clips freely during recording. (
Memo :
● This item cannot be used when [Slot Mode] is set to ABackupB. (A Page 64)
● This item cannot be used when [Rec Mode] is set to a value other than ANormalB or APre
● This item cannot be used when [Rec Mode] is set to a value other than ANormalB or APre
Assigns the function of [Backup Rec] in the [Slot Mode] menu. (
Assigns the function of [AE Area] in the [Camera Function] menu. (
Assigns the Clip Review function. (
Assigns the function to stop recording. This function operates during recording only.
Memo :
this as the stop button. (
Assigns the function of [LCD/VF] menu
For switching the low-light shooting mode ON or OFF.
Assigns the function of [Tele Macro] in the [Camera Function] menu. (
Opens the [TC/UB] menu directly. (
Assigns the function of [LCD/VF] menu
GY-HM150U.book Page 66 Monday, September 5, 2011 1:48 AM