Nikon P900 Manuel D’Utilisation

E

Re
fere

nce

 S

e

cti
on

Press the 

q (Wi-Fi) button on the 

camera.

• The screen shown on the right is displayed.
• If no connection confirmation is received 

from the smart device within 3 minutes, the 
message No access. is displayed and the 
camera returns to the Wi-Fi options screen.

• You can also select Connect to smart 

device in the Wi-Fi options menu to 
display the screen shown on the right.

Set the Wi-Fi setting on the smart device to On.

• Check the user’s manual provided with your smart device for further details.
• After the network names (SSIDs) that can be used for the smart device are 

displayed, select the SSID displayed on the camera.

• When the Auth./encryp. is set to WPA2-PSK-AES in the Wi-Fi options 

menu, the message for entering a password is displayed.
Enter the password that is displayed on the camera.

Start the “Wireless Mobile Utility” installed on the smart 
device, while Negotiating... Please wait. is displayed on 
the camera.

• The screen for selecting “Take photos” or “View photos” is displayed.
• When the message “Cannot connect to camera.” is displayed, return to step 

1 and retry the procedure.

• See “Installing the Software on the Smart Device” (

A60).

C

You can capture still images using the two methods described below.

• Release the shutter on the camera and save the captured images to a smart device.

• Use a smart device to remotely release the camera shutter and save images to the 

smart device.

XXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXX

Cancel

Password:

SSID:

Connect to smart device