Nikon P900 Manuel D’Utilisation
11
Pre
parin
parin
g for Sh
ootin
g
1
With the battery installed, connect the camera to an
electrical outlet.
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or region in
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or region in
which the camera was purchased.
This step can be omitted if the plug adapter comes permanently bonded to
the charging AC adapter.
This step can be omitted if the plug adapter comes permanently bonded to
the charging AC adapter.
• The power-on lamp (charge lamp) slowly flashes green to indicate that the
battery is charging.
• When charging is complete, the power-on lamp turns off. It takes about
3 hours and 40 minutes to charge a fully exhausted battery.
• The battery cannot be charged when the power-on lamp quickly flashes
green, possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
2
Disconnect the charging AC adapter from the electrical
outlet and then disconnect the USB cable.
Charge the Battery
Power-on lamp (charge lamp)
Electrical
outlet
USB cable (included)
Charging
AC Adapter