Nikon S6100 Manuel D’Utilisation

T

e

ch

n

ical
 No

te

s an

d I
n

de
x

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Description

Solution

A

O (blinks)

Clock not set.

Set date and time.

N
Battery exhausted.

Battery exhausted.

Charge or replace the 
battery.

P
Battery temperature 
high

Battery temperature is 
high.

Turn off camera, and allow 
battery to cool down 
before resuming use. After 
five seconds, this message 
will disappear, the monitor 
will turn off, and the 
power-on lamp will blink 
rapidly. After the lamps 
blink for three minutes, the 
camera will turn off 
automatically. Pressing the 
power switch also turns off 
the camera.

Q (

● blinks red)

Camera cannot focus.

• Refocus.
• Focus on another 

subject positioned at the 
same distance from the 
camera as the intended 
subject.

30, 31
54

P
Please wait for the 
camera to finish 
recording.

Camera cannot perform 
other operations until 
saving is complete.

Wait until message clears 
from display automatically 
when saving is complete.

–

u
Memory card is write 
protected.

Write-protect switch is in 
“lock” position.

Slide write-protect switch 
to “write” position.

P
This card cannot be 
used.

Error accessing memory 
card.

• Use approved card.
• Check that connectors 

are clean.

• Confirm that memory 

card is correctly inserted.

177
24

P
This card cannot be 
read.