Nikon L105 Manuel D’Utilisation

Techn

ic

al Not
es

If the camera fails to function as expected, check the list of common problems 
below before consulting your retailer or Nikon-authorized service representative. 
Refer to the page numbers in the right-most column for more information.

Problem

Cause/Solution

A

Monitor is blank

• Camera is off.
• Battery exhausted.
• Standby mode for saving power: press the 

shutter-release button halfway.

• When flash lamp blinks red, wait until flash has 

charged.

• Camera and computer are connected via USB 

cable.

• Camera and TV are connected via AV cable.

20
20
15, 24

Monitor is hard to read

• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.

100
118

Camera turns off without 
warning

• Battery exhausted.
• Camera has turned off automatically to save 

power.

• Battery is cold.

20
106

Date and time of recording are 
not correct

• Images taken while the clock is not set will 

have a time stamp of “00/00/0000 00:00”; 
movies will be dated “01/ 01/2011 00:00”. Set 
the correct date and time using Date in the 
setup menu.

• Check camera clock regularly against more 

accurate timepieces and reset as required.

No indicators displayed in 
monitor

Hide info is selected for Photo info.
Select Show info.

Date imprint not available

Camera clock has not been set.

Date not being displayed on 
images even when Date 
imprint is enabled

• Date imprint cannot be used with the current 

shooting mode.

• A feature that cannot be used with date 

imprint is selected.

• Date imprint cannot be used when recording 

movies.

Camera settings reset

The clock battery is exhausted; all settings were 
restored to their default values.