Nikon ED 120 Manuel D’Utilisation
41
Additional Information
Correcting the date and time
(Lite Touch Zoom 120ED QD only)
1.
Press the MODE/SEL button for more than 2
seconds.
seconds.
When the date/time display format is Year/Month/Day, Month/Day/Year,
or Day/Month/Year, the left most number indicator blinks first. For Day/
Hour/Minute display, the center number indicator blinks first.
The date/time correction can be performed with the camera either on or
off. When the camera is on, the data will be immediately registered if
the slide cover is closed, or the Mid-roll Rewind button or a Zoom
button is pressed while the setting is in progress.
or Day/Month/Year, the left most number indicator blinks first. For Day/
Hour/Minute display, the center number indicator blinks first.
The date/time correction can be performed with the camera either on or
off. When the camera is on, the data will be immediately registered if
the slide cover is closed, or the Mid-roll Rewind button or a Zoom
button is pressed while the setting is in progress.
2.
Press the ADJ. button to set the blinking digit.
Each time you press the ADJ. button, the number advances by one.
Holding the ADJ. button pressed for more than 2 seconds advances the
number quickly.
Holding the ADJ. button pressed for more than 2 seconds advances the
number quickly.
3.
When the blinking indicator is correctly set,
press the MODE/SEL button again so that the
next indicator blinks.
press the MODE/SEL button again so that the
next indicator blinks.
Repeat steps 2 and 3 to set all the digits.
When the battery is replaced
a
The LCD panel shows “
.”
a
The date/time is not imprinted in pictures taken while “
” is
indicated. Set the date and time following the above procedure.