Nikon S6200 Manuel D’Utilisation

Step 1 Turn the Camera On

Th

e 

Bas
ics of Shoo

ting and

 Pl

ay

b

ack

• When the camera is turned on, the power-on lamp (green) will light and then 

the monitor will turn on (the power-on lamp turns off when the monitor turns 
on).

• To turn off the camera, press the power switch. When the camera turns off, the 

power-on lamp and the display turn off.

• To turn on the camera and switch to playback mode, press and hold the 

c 

(playback) button. The lens will not extend.

C

If no operations are performed for a while, the monitor will turn off, the camera will enter standby 
mode, and the power-on lamp will blink. If no operations are performed for another three minutes, 
the camera will turn off automatically.

While the camera is in standby mode, the monitor turns back on if you perform any of the following 
operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback) 

button, or 

b (e movie-record) button

• The time that elapses before the camera enters standby mode can be changed using the Auto off 

setting in the setup menu (

• By default, the camera enters standby mode in about one minute when you are using shooting 

mode or playback mode.

• If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30 minutes.

7 6 0

7 6 0

2 9 m   0 s

2 9 m   0 s

Blinks

No operations 

performed

No operations 

performed

3 min

Camera enters 

standby mode.

Camera turns off.